Industry I/O module | Singapore IOT, GPS, Modem, RTU, SMS Gateway, AI Video Analysis System

Ethernet Remote I/O Module M420T

robin — Wed, 17 Nov 2021 09:52:24 +0000

The M420T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M420T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements. The M420T Ethernet Remote I/O module provides 16 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Digital Output
Type	Sink
I/O Mode	DO or Pulse Output
Pulse Output Frequency	10Hz~300KHz(Only the 1^st Channel can be used as high speed pulse outputs)
Over-Voltage Protection	50 VDC
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Load Current	Max. 500 mA per channel
Digital sampling frequency	500Hz
Isolation	If DO is Sink type, then no isolation. If it is Relay, then is electrical isolation.
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP,MQTT, TCP Server, TCP Client
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.300
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 16 digital output or relay output, supports 10Hz~300KHz high speed pulse output;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M410T

robin — Wed, 17 Nov 2021 09:39:23 +0000

The M410T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M410T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M410T Ethernet Remote I/O module provides 16 optical-isolated digital inputs, supports max. 700KHz high speed pulse counter. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND=1 • Off: open=0
Wet Contact (DI to COM)	• On: 10 to 30 VDC=1 • Off: 0 to 3 VDC=0
Counter Frequency	Max. 700Khz (Only the 1^st Channel can be used as high speed pulse counter)
Digital sampling frequency	500Hz
Digital filtering strategy	Continues 3 times
Isolation	Optical Isolated,3k VDC or 2k Vrms
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	12 to 36 VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP,MQTT,TCP Server, TCP Client
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

5. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

6. 16 optical isolated digital input, supports max. 700Khz high speed pulse counter;

7. High sampling frequency and special filtering strategy to ensure reliability;

8. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

9. Supports register mapping function and extend I/O inquiry strategy;

10.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

11.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

12.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M340T

robin — Wed, 17 Nov 2021 09:32:06 +0000

The M340T Ethernet Remote I/O Module is an industrial class, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M340T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M340T Ethernet Remote I/O module provides 8 RTD inputs, supports PT100 and PT1000 resistance sensor, compatible 2 or 3 wires, the resolution is 0.1°C. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• RTD Input
Sensor Type	PT100 or PT1000
Resolution	0.1°C or 0.1 ohm
Input Connection	2- or 3-wire
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Sampling frequency	20Hz
Isolation	No
• Working Power Requirements
Input Voltage	12~36VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.300
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 8 RTD input, supports PT100 and PT1000 resistance sensor, compatible 2 or 3 wires;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M330T

robin — Wed, 17 Nov 2021 09:27:05 +0000

The M330T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M330T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M330T Ethernet Remote I/O module provides 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Analog Input
Type	Differential input
Resolution	12 bits
I/O Mode	Voltage / Current (jumper selectable)
Input Range	0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C
Sampling frequency	20Hz
Built-in Resistor for Current Input	162 ohms
Isolation	Electrical isolation
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	12 to 36 VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M320T

robin — Wed, 17 Nov 2021 09:21:23 +0000

The M320T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M320T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements. The M320T Ethernet Remote I/O module provides 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Digital Output
Type	Sink
I/O Mode	DO or Pulse Output
Pulse Output Frequency	10Hz~300KHz(Only the 1^st Channel can be used as high speed pulse outputs)
Over-Voltage Protection	50 VDC
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Load Current	Max. 500 mA per channel
Digital sampling frequency	500Hz
Isolation	If DO is Sink type, then no isolation. If it is Relay, then is electrical isolation.
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP,MQTT, TCP Server, TCP Client
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.300
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M310T

robin — Wed, 17 Nov 2021 09:14:46 +0000

The M310T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M310T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M310T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 700KHz high speed pulse counter. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND=1 • Off: open=0
Wet Contact (DI to COM)	• On: 10 to 30 VDC=1 • Off: 0 to 3 VDC=0
Counter Frequency	Max. 700Khz (Only the 1^st Channel can be used as high speed pulse counter)
Digital sampling frequency	500Hz
Digital filtering strategy	Continues 3 times
Isolation	Optical Isolated,3k VDC or 2k Vrms
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	12 to 36 VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP, MQTT, TCP Client, TCP Server
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 8 optical isolated digital input, supports max. 700Khz high speed pulse counter;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M240T

robin — Wed, 17 Nov 2021 09:09:27 +0000

The M240T Ethernet Remote I/O Module is an industrial class, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M240T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M240T Ethernet Remote I/O module provides 4 RTD inputs, supports PT100 and PT1000 resistance sensor, compatible 2 or 3 wires, the resolution is 0.1°C. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• RTD Input
Sensor Type	PT100 or PT1000
Resolution	0.1°C or 0.1 ohm
Input Connection	2- or 3-wire
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -40 and 75°C
Sampling frequency	20Hz
Isolation	No
• Working Power Requirements
Input Voltage	12~36VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.300
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 4 RTD input, supports PT100 and PT1000 resistance sensor, compatible 2 or 3 wires;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M230T

robin — Wed, 17 Nov 2021 09:04:29 +0000

The M230T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M230T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M230T Ethernet Remote I/O module provides 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Analog Input
Type	Differential input
Resolution	12 bits
I/O Mode	Voltage / Current (jumper selectable)
Input Range	0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C
Sampling frequency	20Hz
Built-in Resistor for Current Input	162 ohms
Isolation	Electrical isolation
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	12 to 36 VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 4 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU Master and slave, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M220T

robin — Wed, 17 Nov 2021 08:59:38 +0000

The M220T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M220T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M220T Ethernet Remote I/O module provides 4 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Digital Output
Type	Sink
I/O Mode	DO or Pulse Output
Pulse Output Frequency	10Hz~300KHz(Only the 1^st Channel can be used as high speed pulse outputs)
Over-Voltage Protection	50 VDC
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Load Current	Max. 500 mA per channel
Digital sampling frequency	500Hz
Isolation	If DO is Sink type, then no isolation. If it is Relay, then is electrical isolation.
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP,MQTT,TCP Server, TCP Client
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.300
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 4 digital output or relay output, supports 10Hz~300KHz high speed pulse output;

6. High sampling frequency and special filtering strategy to ensure reliability;

7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

8. Supports register mapping function and extend I/O inquiry strategy;

9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Ethernet Remote I/O Module M210T

robin — Wed, 17 Nov 2021 08:53:24 +0000

The M210T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M210T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M210T Ethernet Remote I/O module provides 4 optical-isolated digital inputs, supports max. 700KHz high speed pulse counter. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND=1 • Off: open=0
Wet Contact (DI to COM)	• On: 10 to 30 VDC=1 • Off: 0 to 3 VDC=0
Counter Frequency	Max. 700Khz (Only the 1^st Channel can be used as high speed pulse counter)
Digital sampling frequency	500Hz
Digital filtering strategy	Continues 3 times
Isolation	Optical Isolated,3k VDC or 2k Vrms
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	12 to 36 VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Support Web realtime monitoring and Web debugging;

5. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

6. 4 optical isolated digital input, supports max. 700khz high speed pulse counter;

7. High sampling frequency and special filtering strategy to ensure reliability;

8. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

9. Supports register mapping function and extend I/O inquiry strategy;

10.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

11.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

12.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.