Ethernet Remote I/O Module M130T

Ethernet Remote I/O Module M130T

SGD 256

  • Rated Voltage: 12 ~ 36VDC;
  • 8DIN+4DO+1RJ45+1RS485;
  • 1 RS485 Serial port, supports Modbus RTU Master or slave, can extend I/O modules;
  • Wet Contact (NPN or PNP), Dry Contact;
  • DO Sink or Pulse Output
Category:

The M130T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M130T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M130T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max.700Khz high speed pulse counter, 4 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

 

Specifications:

Ethernet Remote I/O Module Specifications

• Digital Input

Sensor Type

Wet Contact (NPN or PNP), Dry Contact

I/O Mode

DI or Event Counter

Dry Contact

• On: short to GND=1 • Off: open=0

Wet Contact (DI to COM)

• On: 10 to 30 VDC =1 • Off: 0 to 3 VDC=0

Counter Frequency

Max. 700KHz(Only the 1st Channel can be used as high speed pulse counter)

Digital sampling frequency

500Hz

Digital filtering strategy

Continues 3 times

Isolation

Optical Isolated,3k VDC or 2k Vrms

• Digital Output

Type

Sink

I/O Mode

DO or Pulse Output

Pulse Output Frequency

10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)

Over-Voltage Protection

50 VDC

Over-Temperature Shutdown

175°C (typical), 150°C (min.)

Load Current

Max. 500 mA per channel

Digital sampling frequency

500Hz

• Working Power Requirements

Input Voltage

12~36VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;

Input Current

139 mA @ 24 VDC

• Power Output

Output Voltage

12~36VDC

Output Current

139 mA @ 24 VDC

• LAN

Ethernet

10/100 Mbps RJ45 ports

Protection

15KV ESD Protection

Protocols

Modbus TCP, TCP/IP,MQTT, TCP Server, TCP Client

Max. TCP Connection

5

• Serial Port

RS485

MODBUS- RTU Protocol, Modbus-ASCII Protocol

Protection

15KV ESD Protection

Modbus Slave address

1~255

Baud Rate

1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;

Mapping registers

Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

• Physical Characteristics

Wiring

I/O cable max. 14 AWG

Dimensions

105 x 88 x 30 mm

Weight

Under 205 g

Mounting

DIN rail or wall

• Environmental Limits

Operating Temperature

Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Altitude

Up to 3000 m

 

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Power supply 12~36VDC  with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Support Web realtime monitoring and Web debugging;  

5. DO1 support PWM output;

6. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

7. 8 optical isolated digital input, supports max. 700Khz high speed pulse counter;

8. 4 digital output or relay output, supports 10Hz~300KHz high speed pulse output;

9. High sampling frequency and special filtering strategy to ensure reliability;

10.1 RS485 Serial port, supports Modbus RTU Master or slave, can extend I/O modules;

11.Supports register mapping function and extend I/O inquiry strategy;

12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field.

Reviews

There are no reviews yet.

Be the first to review “Ethernet Remote I/O Module M130T”

Your email address will not be published. Required fields are marked *