Ethernet Remote I/O Module M140

Ethernet Remote I/O Module M140

SGD 324

  • Rated Voltage: 12 ~ 36VDC;
  • 8DIN+8DO+1RJ45+1RS485;
  • 1 RS485 Serial port, supports Modbus RTU Master or slave, can extend I/O modules;
  • Wet Contact (NPN or PNP), Dry Contact;
  • DO Sink or Pulse Output

The M140T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M140T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M140T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 700KHz high speed pulse counter, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

 

Specifications:

Ethernet Remote I/O Module Specifications

• Digital Input

Sensor Type

Wet Contact (NPN or PNP), Dry Contact

I/O Mode

DI or Event Counter

Dry Contact

• On: short to GND=1 • Off: open=0

Wet Contact (DI to COM)

• On: 10 to 30 VDC =1 • Off: 0 to 3 VDC=0

Counter Frequency

Max. 700kHz(Only the 1st Channel can be used as high speed pulse counter)

Digital sampling frequency

500Hz

Digital filtering strategy

Continues 3 times

Isolation

Optical Isolated,3k VDC or 2k Vrms

• Digital Output

Type

Sink

I/O Mode

DO or Pulse Output

Pulse Output Frequency

10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)

Over-Voltage Protection

50 VDC

Over-Temperature Shutdown

175°C (typical), 150°C (min.)

Load Current

Max. 500 mA per channel

Digital sampling frequency

500Hz

• Working Power Requirements

Input Voltage

12~36VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;

Input Current

139 mA @ 24 VDC

• Power Output

Output Voltage

12~36VDC

Output Current

139 mA @ 24 VDC

• LAN

Ethernet

10/100 Mbps, RJ45 ports

Protection

15KV ESD Protection

Protocols

Modbus TCP, TCP/IP,MQTT,TCP Server, TCP Client

Max. TCP Connection

5

• Serial Port

RS485

MODBUS RTU over TCP Protocol, Modbus TCP Protocol

Protection

15KV ESD Protection

Modbus Slave address

1~255

Baud Rate

1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;

Mapping registers

Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

• Physical Characteristics

Wiring

I/O cable max. 14 AWG

Dimensions

105 x 88 x 30 mm

Weight

Under 205 g

Mounting

DIN rail or wall

• Environmental Limits

Operating Temperature

Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Altitude

Up to 3000 m

 

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Power supply 12~36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

5. 8 optical isolated digital input(default is wet contact,if you want dry contact please contact us), supports max. 700Khz high speed pulse counter;

6. 8 digital output (default is sink output), supports 10Hz~300KHz high speed pulse output;

7. High sampling frequency and special filtering strategy to ensure reliability;

8. 1 RS485 Serial port, supports Modbus RTU Master or slave, can extend I/O modules;

9. Supports register mapping function and extend I/O inquiry strategy;

10.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

11.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

12.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial  applications in the field;

13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Additional information

Model

T-version, E-version

Reviews

There are no reviews yet.

Be the first to review “Ethernet Remote I/O Module M140”

Your email address will not be published. Required fields are marked *